When
you make a satchel or have a go at making packs you will need to lay
the covering fabric on the highest point of the front board and the
handles confronting down. In market, you can find low cost jute shopping bags
which are portable. Pin everything together into the top side. Take the
front a large portion of your purse to the sewing machine and join it
over the top. Verify that you leave no less than one fourth of an inch
for crease stipend. You need to do likewise to set up the back board.
After every board is finished hauling out your pins and overlay down the
pieces so they can be squeezed together the two sections with your
iron.
Pin
the two right sides together. Verify that you line them up as close as
could be allowed. Butt up the highest point of the pack so you don't
over-burden your sewing machine's needle. Sew up both sides of the sack
and the base of the outside of the pack. Verify that you are still
permitted one fourth additional material for the crease remittance.
As
you make a tote, in the event that you need your sack to have a square
base, then you're going to need to cut the edges. Utilize your ruler to
stamp on the interfacing square, measure from the crease line rather
than the fabric edge. Do this on both sides and remove your squares with
the scissors. Verify that you utilize the same procedure as on the last
crease. Verify that every crease is going the right way, and rehash the
same procedure on the other square.
The last things you have to do to make a tote or when making jute bags
are to haul the covering out of the sack and pin the base together.
Verify that the edges are confronting inside. Sew the little opening
together and complete it off with a little bunch that is slipped into
the fabric. Sew around the edge of the satchel lastly press the pack
with your iron to escape from all the rumples.